Leather Trimming belt/Tannery Leather-Trimming Conveyor Table
Leather-Trimming Conveyor Table is heavy-duty dedicated worktable for tannery beam-house section. It transfers hides between fleshing machine and splitting machine and serves as trimming workstation, replacing manual hide-carrying to realize continuous workflow and raise workshop productivity.
The main frame is laser-cut, bent and assembly-welded from 3 mm thick 304 stainless-steel plate. Height-adjustment mechanism at frame bottom offers adjustment range of 0-50 mm to match installation height of upstream & downstream machines. Heavy-duty loading capacity reaches 2 tons per meter for heavy hide processing. Polymer wear strips (molecular weight:5 million) are installed on upper frame contacting area for smooth sliding and reduced chain-plate abrasion.
Conveying section adopts PP tooth-pit modular chain-belt with high tensile strength and anti-deviation performance. Modular-structure chain plates allow partial disassembly and replacement to cut maintenance cost. Drive unit consists of domestic-brand geared motor with VFD for adjustable running speed. Drive shaft and tension shaft are equipped with stainless-steel gears for corrosion resistance and easy servicing. Standard dimensions are 1.8 m×9 m and 1.8 m×3.5 m; custom length & width can be supplied according to plant layout and machine spacing. The whole unit works stably under wet acid-alkali tannery conditions.
Key Features
1. Integral 304-stainless-steel frame with heavy-duty loading capacity of 2 tons per meter for heavy-weight hide transportation.
2. 0-50 mm height-adjustable base to align installation height of fleshing machine and splitting machine.
3. 5-million-molecular-weight polymer wear strips reduce friction loss and extend service life of chain belt.
4. PP tooth-pit modular chain belt features high tensile strength and anti-deviation performance; single-piece replaceable for low-cost maintenance.
5. VFD variable-frequency speed regulation; stainless-steel gears fitted on drive-shaft & tension-shaft, corrosion-resistant and easy-to-disassemble.
6. Standard sizes optional, non-standard customization supported, specially for hide transfer between fleshing machine and splitting machine.
FAQ
Q1: What material is the main frame of this leather-trimming conveyor table made of?
A1: The main frame is fabricated of 3 mm-thick 304 stainless-steel plate, processed by laser cutting, bending and assembly welding, which provides good corrosion-resistance under damp tannery working conditions.
Q2: What is the loading capacity per meter of the conveyor table?
A2: Its loading capacity reaches 2 tons per meter, which can satisfy heavy-duty transportation for large and heavy raw hides in tanneries.
Q3: Can the working height of this conveyor table be adjusted?
A3: Yes. Equipped with height-adjustment mechanism at frame bottom, adjustable range is 0-50 mm for height matching with fleshing machine and splitting machine.
Q4: What are the advantages of the PP tooth-pit modular chain belt?
A4: It has high tensile strength and anti-deviation performance. Modular structure supports partial single-plate replacement without disassembling whole conveyor, which lowers maintenance work and operating cost.
Q5: What is the function of 5-million-molecular-weight polymer wear strips?
A5: Installed on frame contact position with chain belt, it delivers excellent self-lubricating and wear-resistant performance, reduces friction and abrasion of chain-belt components to extend service life.
Q6: What standard sizes are available for this conveyor table?
A6: Standard sizes are 1.8 m×9 m and 1.8 m×3.5 m. Custom-made length and width can be offered based on customer’s on-site layout and machine spacing.
Q7: Where is this conveyor table mainly applied in tannery production? A7: It is specially used for hide transferring operation between fleshing machine and splitting machine in beam-house workshop, also works as trimming operation workstation for continuous production flow.
Q8: Are drive-shaft and tension-shaft gears corrosion-resistant?
A8: Yes, both drive-shaft and tension-shaft adopt stainless-steel gears. They resist the corrosive moisture inside tannery plant and are convenient for disassembly and daily maintenance.
|
The Specification(mm) |
Leather Trimming belt(From fleshing machine to splitting machine ) |
| Size | 1.8m×9m and 1.8m×3.5m |
| Main Frame | 3 mm thick 304 stainless steel plate by laser cutting, bending and assembly welding |
| The bottom of the frame | Designed a height adjustment mechanism,with an adjustment range of 0–50 mm |
| The main frame load capacity | 2 tons per meter |
| The upper part of the frame | equipped with polymer wear strips (molecular weight: 5 million) in contact with the conveyor belt, ensuring excellent sliding performance during operation. |
| Conveyor Belt | Adopts PP modular chain belt. The back of the chain plate is tooth-pit type, featuring high tensile strength, no deviation, easy disassembly, convenient maintenance and low operating cost |
| Drive Unit | Controlled by frequency converter (VFD) and equipped with a domestic brand geared motor. |
| The drive shaft and tension shaft | stainless steel gears, which are durable and easy to disassemble and maintain. |









