head_banner

Tannery Overhead Hanging Conveyor/Overhead Monorail Conveyor for Leather Fleshing/Hot-dip Galvanized Overhead Hanging Conveyor with XT-100 Forged Chain for Tannery Hide & Limed-hide Fleshing Process

Short Description:

Tannery Overhead Hanging Conveyor is used for hanging transportation of raw hides and limed hides in the fleshing process. It adopts hot-dip galvanized 12# I-beam track, fitted with XT-100 forged chain and cast-steel carrier trolleys. Equipped with 304 stainless-steel hide clips with 120 kg single-point load capacity. VFD provides stepless speed regulation from 0-14 m/min with Schneider electric components. It adapts to complex workshop routing, saves floor space and improves automation of fleshing procedure.


Product Detail

Tannery Overhead Hanging Conveyor is specially developed for raw hide and limed-hide transportation in tannery fleshing workshop. It cooperates with fleshing machines for continuous process flow and frees up valuable floor space compared with ground-type conveyors.

The complete set consists of track system, forged chain & cast-steel trolleys, stainless-steel hide clips and drive-speed-regulation unit. The main track is hot-dip galvanized 12# I-beam, including straight rails, turning units, tensioners, horizontal rails, uphill and downhill sections, which can be arranged flexibly according to plant layout. It adopts XT-100 forged chain and cast-steel carrier trolleys with trolley spacing of 400 mm. Hide clips are welded assemblies of 304 stainless steel, clip spacing 1200 mm and single-point load capacity up to 120 kg for firm clamping and corrosion resistance.

Drive system adopts domestic-brand geared motor with VFD for stepless speed adjustment within 0-14 m/min. Main electric control components are Schneider brand for reliable performance. Hides are hung on stainless-steel clips and travel along overhead monorail. It supports turning, ascending and descending routes and connects with fleshing machines for smooth workflow.

Key Features

1. Overhead hanging layout to maximize usable workshop floor area without occupying ground passages.

2. Hot-dip galvanized I-beam track with turning, tensioning, uphill-downhill assemblies; flexible routing for complex plant conditions.

3. XT-100 forged chain plus cast-steel trolleys for heavy-duty long-time operation; 304 stainless-steel hide clips resist damp corrosive tannery environment, single-point load 120 kg.

4. VFD stepless speed range 0-14 m/min to match variable production rhythm; Schneider electric components ensure low failure rate.

5. Purpose-built for raw-hide & limed-hide fleshing process, realizing continuous material transfer with fleshing machines.

6. Customizable track layout, trolley pitch and hide-clip spacing according to site requirements.

 

 

FAQ

Q1: What material is the main track made of? 

A1: The main track adopts 12# I-beam with hot-dip galvanized surface treatment, anti-rust for humid tannery environment, complete with turning, tensioning and slope-change assemblies.

Q2: What is the load-bearing capacity of each hide clip?

 A2: The hide clip is fabricated from 304 stainless steel. Its single-point load capacity reaches 120 kg, suitable for heavy raw hides and limed hides.

Q3: Can running speed be adjusted? 

A3: Yes. Equipped with VFD frequency converter for stepless speed regulation within range 0-14 m/min to adapt different production output.

Q4: What kind of chain does this overhead conveyor adopt? 

A4: It uses heavy-duty XT-100 forged chain together with cast-steel carrier trolleys, trolley spacing is 400 mm, durable for continuous heavy-load operation.

Q5: Can the track layout adapt uphill, downhill and turning routes?

 A5: Yes. The system contains straight rails, turning units, tensioners, uphill and downhill rails. Custom layout can be designed according to actual workshop conditions.

Q6: Which tanning process is this hanging conveyor suitable for?

 A6: It is specially designed for hanging transport of raw hides and limed hides for fleshing procedure, can be matched with fleshing machines for continuous production.

 

No. 29  The Specification(mm)

Overhead conveyor line from soaking drums to fleshing machine

Size

60meters

Conveyor Track

12# I-beam (hot-dip galvanized surface), including straight track, turning unit, tensioning unit, horizontal track, uphill track and downhill track.

Conveyor Chain

XT-100 die-forged chain and load-bearing trolleys (cast steel) with a trolley spacing of 400 mm.

hide clamps

fabricated by welding 304 stainless steel, with a spacing of 1200 mm

Single-point lifting load

120 kg

Drive System

Controlled by VFD (frequency converter) to realize stepless speed regulation, ensuring high transmission efficiency and reliable operation

other electrical components

Schneider brand

Operating speed

0–14 m/min


  • Previous:
  • Next:

  • Write your message here and send it to us
    whatsapp